不銹鋼材料板1.4313是馬氏體級，耐腐化高，熱處置后耐久度性好。X3CrNiMo13-4鋼的設備機械制造功能是在化學式其他有害物質中鉬和鎳的高含磷量。等等合金材料增添劑控制了提升級碳含磷量的要求——給定溶液濃度十分于奧氏體不銹鋼材料板。只不過鎳含磷量低，但鎳含磷量約為4%，偏態增加了鋼對所有各樣的腐化自然環保的抵擋力——三次設備機械制造功能。X3CrNiMo13-4鋼用戶組可事業高達到300℃在事業溫度下事業的組件加工和組件加工，或者裸露在所有各樣的腐化自然環保中的組件加工，還堅持十分的外壁因素括抗氯化物材質)。QT650.QT780和QT900因素下，熱處置后里常交工鋼材。半的成品在原油使用量事業.熱.在冶金工程和電力能源制造行業，鍋輪機裸露在高一個溫和高溫下.泵.降低機零件。鋼惡化的情況合焊接生產。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50供貨EN1.4313馬氏體不銹鋼材質享有降溫功能（+A）的情況、蘸火和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，需用哪兩個必然要跟保險業務說模糊哦。